Fixed Mount Type Infrared Thermal Imager

Thermo Tracer TS9100

TS9100
Thermal Image
Protective Housing (optional)

Protective Housing (optional)
Provides support for various monitoring needs from stand-alone to large remotely controlled installations
The TS9100 fixed-mount Infrared Thermal Imager has many applications such as-
  • monitoring production line equipment, plant and public facilities;
  • prevention of serious accident and fire
  • temperature control for production quality improvement
  • intruder detection for security
    • The camera has three alarm modes (two for temperature anomalies and one self-malfunction warning) which allow it to operate as a stand-alone unit.
    By using one of the interfaces (RS232C -standard, IEEE1394 or Ethernet - optional) a larger system can be configured for remotely controlled monitoring or real-time thermal image transfer.
    Features
  • Used as a stand-alone monitoring system
    With various settings available for the alarm functions the unit can be operated independently.
  • Uses general-purpose interfaces and cables
    With the standard RS232C and optional IEEE1394 or Ethernet interfaces fast and large data processing systems can cover a broad field.
  • Large system configurable
    Multiple TS9100s can be connected and controlled within a large monitoring system. The continuous temperature data, vital for large applications, can be monitored and recorded on a real-time basis.
  • Software Development Kit (SDK)
    This optional extra allows development of user's own software.
  • Robust construction for field operation
    The main unit has IP54 protection rating. An optional protection housing is available for extreme conditions of temperature or dust.
    		•
    Configuration Examples
  • Stand-alone system
    		•   
  • Basic system configuration
    		•
         
  • Large System
    		•
    System Application Examples
  • Temperature detection system for waste disposal facility
    		•
    Outline
    This system gives continuous overall coverage of the landfill site to detect potential fire risk in the most economical manner possible thus reducing the monitoring cost.
    Feature
  • The TS9100 can be set up from the control panel on the back or from the remote PC via the Ethernet
  • Once set up the TS9100 unit can be disconnected from the PC and operated as a stand-alone unit,
  • If the measured temperature exceeds the set threshold the alarm signal is generated.
  • The TS9100 can output NTSC/PAL video signal for checking thermal images on the LCD screen.
    • User benefits
  • Monitoring cost reduction using 24-hour unmanned system.
  • The infra-red camera is ideal for night-time surveillance
  • Further cost reduction is possible using one TS9100 mounted on the swivel unit to cover a wider area.
    		•
  • Temperature monitoring system for motors of production machinery
    		•
    Outline
    This system monitors continuously the temperature of production line motors to detect overheating generated by potential failures.
    Feature
  • Multiple TS9100s can be controlled centrally from a PC at a remote office (via Ethernet)
  • When measuring temperatures that are higher than the set threshold, TS9100 can output an alarm signal.
  • TS9100 can output NTSC/PAL video signal for checking thermal images on the LCD monitor
    		•
    User benefits
  • Early warning of potential failures prevents costly breakdowns and production interruptions.
    		•
  • Temperature monitoring system for steel ladle shell
    		•
    Outline
    This system measures the steel ladle exterior temperature, analyses the data and signals any over-temperature situation.
    Feature
  • Automatic monitoring of the steel ladle shell temperature with data analysis enables overheating to be signalled.
  • Temperature distribution display indicates problem areas and location for prompt repair.
  • Spillages of molten metal are prevented. Potential repair requirements are predicted and locations are automatically specified.
    		•
    User benefits
  • Users can benefit from easy prediction for repairs and prevention of molten iron leakage.


    •  
    Specifications
    Measuring range    TS9100M TS9100W
     Range1  -20 to 100ºC
    (calibrated at 0 to 100ºC.
    Outside is theoretical value)    		 -40 to 120ºC
    (calibrated at 0 to 120ºC.
    Outside is theoretical value)
     Range2  0 to 250ºC
    (calibrated at 0 to 250ºC)    		 0 to 500ºC
    (calibrated at 0 to 500ºC)
     Optional  200 to 1000ºC or 200 to 2000ºC (without range 1& 2)
    Resolution
    (Defined as waveform noise/10)    		  Range1  0.06ºC(at 30ºC 60Hz)
    0.03ºC(at 30ºC S16)    		 0.08ºC(at 30ºC 60Hz)
    0.04ºC(at 30ºC S16)
     Range2  0.15ºC(at 30ºC 60Hz)
    0.08ºC(at 30ºC Σ16)    		 0.30ºC(at 30ºC 60Hz)
    0.15ºC(at 30ºC Σ16)
    Accuracy ±2ºC or ±2% of reading whichever is greater
    (When ambient temp 0—40ºC, standard 21.7° lens used, focusing range 50cm)
    Detector Uncooled focal plane array (microbolometer)
    Spectral range 8 to 14μm
    I.F.O.V. 1.2mrad (When standard 21.7° lens is used.)
    Focusing range 30cm to infinity (motor driven only, at std, wide-angle, 29°lenses
    Field of view 21.7°±1.1°(H) × 16.4°±0.9° (V)when using standard 21.7°lens
    Frame time 60 frames/sec
    Thermal image pixels 320(H)×240(V) pixels(Three lines each on all edges are out of specification)
    A/D resolution 14bits
    Alarm output Contact output(photo MOS relay),voltage:DC+10 to 27V,current:40mA or less
    Measuring functions
    S/N improvement  
    Event output  
    		 Run/Freeze
    Σ2, Σ8, Σ16, and spatial filter ON/OFF
    Screen display
    Env.temp.correction Provided(including interval NUC)
    Background compensation Provided
    Auto functions Full automatic(level,sense,focus),auto level/sense(manual available),
    auto focus, level trace, auto-gain control
    Display functions Display color : color/monochrome, positive/negative
    Gradation:16, 32, 64, 128, 256
    Color palette : rainbow, brightness, shine, hot-iron, medical, fine
    Isothermal band display : max 4 bands
    Multi-sense display
    Wave form display: X-Y waveform at freeze mode
    Alarm display : alarms of temp and TS9100 self diagnosis
    Multilingual menu
    Image processing functions Variable level/sense(at Freeze mode)
    Multi-point temperature display (10 points)
    Multi-point emissivity display (10 points)
    Δt display
    Max/Min (peak hold) temperature display (full screen or specified area)
    Digital zoom: 2, 4 times (Run/Freeze)
    Box setting (max. 5 boxes)
    Temperature alarm output
    Data display Color bar(grayscale), temp range, temp level. emissivity, multi-point temp display, time, annotation, error display, multilingual menu: English, French, German, Portuguese, Spanish, Japanese
    Annotation Text annotation
    Video signal output NTSC/PAL composite video signal (BNC connector)
    Interface RS-232C (standard) IEEE1394 or Ethernet (option: select when order)
    Operating temp/humidity -15 to 50ºC, 90% RH or less(not condensed)
    Storage temp/humidity -40 to 70ºC, 90% RH or less(not condensed)
    Power supply DC 11 to 13V
    Power consumption Approx. 5W(typical): at environmental temp 20ºC, RUN mode, RS-232C interface
    Shock and vibration 294m/s2(IEC60068-2-27), 29.4m/s2(IEC60068-2-6)
    Environmental protection IP54(IEC60529)
    Dimenstions Approx. 99 (W) x 112 (H) x 206 (D) mm
    (w/ standard, wide-angle or 29° lens: excluding projection)
    Approx. 112 (W) x 112 (H) x 230 (D) mm
    (with 2x telephoto lens: excluding projection)
    Weight Approx. 2.6kg (w/ standard, wide-angle or 29° lens)
    Standard accessories Lens cap, operation manual, power connector
    Specifications are subject to change without prior notice.
  • Options
    		•
    Item Model Description
    High Temperature Range TS91-390 200 to 1000ºC *1
    High Temperature Range TS91-391 200 to 2000ºC *1
    IEEE1394 interface TS91-462 With data capture software
    Ethernet interface TS91-456 With remote control software
    Protective Housing TS91-350 Air-cooled housing for indoor use
    Software Development Kit   TS91-760  Compatible with Microsoft Windows 2000 and XP 
    Note 1:When installing high temperature range,standard measuring range 1 and 2 can not be used.
  • Lens
    		•
     Standard Lens   21.7° 
     Wide-angle Lens   42.0° 
     2X Telephoto Lens   10.9° 
     Lens of same FOV as TS7302   29.0° 
    Field of View Diagram
    Field of View Diagram
    **When standard (21.7°)lens is used.
  • Outline Diagram
    		•
    Outline Diagram

    Infrared Thermography
    Infrared Products
    Infrared Thermography
    Infrared Module
    Consultant & Training
    Products
    Infrared Thermography
    Infrared Module
    Consultant & Training
    Industrial Measuring Instruments
    Application
    Support
    World Service Cetnter
    Contact Us
    Infrared Thermography
    Infrared Module
    Data Acquisition System
    Company Info
    Group Companies
    Please feel free to request for the estimate and the brochure of the Infrared Camera & the Thermography imager.

    About Infrared camera & Thermography imager, ask NEC Avio Infrared Technologies.