| Unifizer NS3000 Series Version Up Procedures (Free version up program) |
| |
| Outline |
The NS3000_V_2_6A_English.exe is the self-extracting setup program of NS3000 Series "Unifizer" version 2.6A.
Please uninstall old version, then install version 2.6A.
|
| The points of change from version 2.6 to 2.6A |
- DC6100 -
At the time of substance recording setting, when after pushing the “Apply” button, the “OK” button
is pushed, it tried the contents which are already set not to set.
At the time of non- use of Alarm Trigger setting of the alarm was made possible.
Physical conversion it tried not to clear specification at the time of ON → OFF.
When opening the detailed setting dialog of the alarm, the bug where alarm setting becomes OFF was corrected.
The bug where illegitimate value appears with the time trigger of recording and setting was corrected.
When the monitor and recording, the bug where the data is buried irregularly at equivalent was corrected.
DI/ALM the bug where error appears in when recording with the DI mode of module was corrected.
- RA1000, RA2000, DL2800 -
At the time of memory recording, memory block No., data No. uncertainty corrected the trouble which reaches value.
- CAN -
The bug where the monitor is not operational was corrected.
The bug which has been frozen at the time of the manual trigger was corrected.
(* It cannot use manual trigger function with the CAN device.)
- A/D board -
As the substitution (production discontinuance) of ADM677 of the Microscience make A/D board, it corresponded to interface make LPC-311116
|
| Unifizer NS3000 Series Upgrading procedure(V2.6A) |
| 1. |
Uninstall NS3000 Series "Unifizer" old version.
Go to Windows Start-Settings-Control Panel-Add/Remove Programs. Then, uninstall NS3000 old version.
|
| 2. |
Save the upgrading program (NS3000_V_2_6A_English.exe) on any folder and uncompress it.
Execute 'Setup.exe' in the V2.6A folder and start installation.
|
| [V2.6A folder file composition] |
| |
 |
| |
Installation procedure is same as stated in the installation guide.
|
The upgrade is completed above.
|
|
| Condition of use |
All copyrights on this program are reserved by NEC Avio Infrared Technologies Co., Ltd. Unauthorized copying, reproduction, or modification of this software in whole or in part is prohibited.
The contents of this program are subject to change without prior notice.
This program shall be available for the customers uses our product
|
| Down load |
Please request ID and password for down load,
by filling out and sending “THE REQUEST FORM of DOWNLOAD PASSWORD".
|
| – Version up program |
| |
[Version] |
: |
2.6A |
| |
[File name] |
: |
NS3000_V_2_6A_English.exe (Self-extract application) |
| |
[File size] |
: |
87.8MB |
|
