| TH71-717 Data Capture Program Free version up program |
| |
| Version 2.0 to 2.0G → 2.0H |
Thank you very much for your using our TH71-717 Data Capture program.
This is a free service to upgrade the TH71-717 Data Capture program 2.0 to 2.0G, to Version 2.0H.
| The Points of Change From Version 2.0 to 2.0G → 2.0H |
| – The points of change from version 2.0G to 2.0H |
| |
a) |
Trouble to which the data acquired in normal mode(∑8) was displayde in the FAST mode was corrected. |
| – The points of change from version 2.0F to 2.0G |
| |
a) |
When the level sense is changed while recording when the clock of the camera and PC is different, the trouble changed to the clock of the camera is corrected. |
| – The points of change from version 2.0E to 2.0F |
| |
a) |
The name of the company was changed. |
| – The points of change from version 2.0D to 2.0E |
| |
a) |
The problem of the asynchronous communication generated by a part of PC was corrected. |
| |
b) |
It came to operate on Windows Vista. |
| – The points of change from version 2.0C to 2.0D |
| |
a) |
Corrected failure that communication is not available through optical repeater by using WindowsXP. |
| – The points of change from version 2.0B to 2.0C |
| |
a) |
Problem that the temperature value is not calculated if the point emiss is changed, is solved. (This problem is occurred at the thermal image reply program attached to the Ver.2.0B) |
| – The points of change from version 2.0A to 2.0B |
| |
a) |
Problem that the recording at 1/30s although the interval measurement is set at 1/60s, is solved.
(this problem is occurred with the program is integrated with TH9100 series) |
| |
b) |
Improve the function to select 1/60s interval measurement during FAST x 2, 4 setting. |
| – The points of change from version 2.0 to 2.0A |
| |
a) |
Correct the problem of functionality in saving SIT file, where the condition information was wrongly saved if the displayed thermal data was saved as SIT file format. |
| |
b) |
Correct the problem of the functionality in the RUN MODE, where it didn't work depending on the remaining size of your hard disk in PC. |
| * Remarks: |
| Please go to execute the upgrade after uninstalling the lower version. |
|
| Operation environment |
| |
Windows 2000 English version support
Windows XP Home Edition English version support
Windows XP Professional English version support
Windows Vista Ultimate English version support |
|
| How to Install |
| 1. |
Fill out the request form of download pass word. |
| 2. |
Download file address, ID and pass word will be returned to your e-mail address. |
| 3. |
Down load the free update program “TH71-717_2_0H.EXE" to your PC.
* the file extension such as “.EXE" are usually hidden in the Windows Explore. |
| 4. |
Execute TH71-717_2_0H .EXE and decompress any folder in your PC. |
| 5. |
Execute the SETUP.EXE of the folder “TH71-717" and install in accordance with the message appears. |
|
| Operation Condition |
| · |
All copyrights on this program are reserved by NEC Avio Infrared Technologies Co., Ltd.
Unauthorized copying, reproduction, or modification of this software in whole or in part is prohibited. |
| · |
This program can be downloaded and used only for the purpose of updating your licensed TH71-717 Data Capture program.
It is prohibited to down load and use this program for the other purpose. |
| · |
The contents of this program are subject to change without prior notice. |
| · |
This program shall be available for the customers uses our product. |
|
| Down load |
Please request ID and password for down load, by filling out and sending “THE REQUEST FORM of DOWNLOAD PASSWORD".
|
| – Version up program |
| |
[Version] |
: |
2.0H |
| |
[File name] |
: |
TH71-717_2_0H.EXE (Self-extract application) |
| |
[File size] |
: |
7.54MB |
|
